Startseite
Bitte benutzen Sie Ihr MyAccount Passwort der Messe Frankfurt
Schutz & Sicherheit
Einträge 1-10 von 36
1/4
-
Bauglasgewebe und Gittergewebe
JSC “Polotsk-Steklovolokno” manufactures building materials, the application of which is practically not restricted – from building of underground lines and facilities to installation and repair of roofs. Fabrics – the basis of roofing materials. The given glass fabrics are designated as a base for manufacturing of rolled hard faced roofing materials used for production of new built-up roofing and repair of old roofing of any configuration, as well as waterproofing of concrete tanks, hydraulic channels, bridges, foundations and underground structures in a wide range of temperatures and different environmental conditions. There is a possibility to produce the material with cut selvage as well as the fabrics with hydrophobic impregnation. Usage of texturized roving in weft increases adhesion of bitumen-polymer binding to glass fabric. Buildingglassmeshes. The enterprise manufactures building glass meshes, designated both for inside and outside works: for reinforcement of plaster and as a reinforcing material in systems with thermal insulation of filler structures of buildings and facilities; for stuffing of cracks, joints on the ceilings, walls while conducting of repairing works; for sealing of plaster slab joints, as well as other sheet materials in inside finishing of buildings. JSC “Polotsk-Steklovolokno” also manufactures glass meshes of non-building application, designated for reinforcing of cutting wheels, as well as glass magnesium sheets. Thermal insulation materials For thermal insulation works a number of special non-woven E-glass materials are produced. The given materials can be used both in southern regions and in the regions of far north, because their operating range of temperatures (without loss of the main characteristics) is from -800С up to +3500С. Non-woven materials are a scrim made of chaotically located fibers, bonded by multiple needle piercing or sewn by glass yarn. Needle pierced materials are applied practically in all the branches of national economy. The main direction of their usage – as insulation of gas ovens, steam boilers, turbines, supply lines, pipe work – where changing of temperature conditions is not allowed, where heat should be controlled and maintained, where usage of binding resins is not allowed, as well as superb noise insulation. Rolled glass plastics manufactured by the enterprise are used as a covering layer in thermal insulation of pipes and equipment.
Hersteller: Polozk-Steklovolokno AG
Schützende Textilien & Fasern
-
ECOAPHOS® Range
ECOAPHOS® Range ECOAFLUID® Range
Hersteller: ECOATECH GmbH
Schützende Textilien & Fasern
-
Elektroisolierglasgewebe
Electric insulation glass fabrics are produced of different density from 24 to 400 g/sq.m. on textile sizing or finished and are designated for production of materials irreplaceable in production of blocks, panels, computer schemes, instruments, electric motor insulation and insulation of electric equipment units, electric circuits. Glass fabric for production of foiled laminates and non-foiled dielectrics. Glass fabrics are used in production of foiled laminates from which one side, two sides and multilayer printed circuit boards are produced. Thanks to the unique properties of electric insulation glass fabrics the materials on their basis have high mechanical and electric insulation properties, are easily subjected to mechanical treatment by cutting, drilling and impact molding. Electric insulation glass fabrics are also designated for production of non-foiled dielectrics. High mechanical density and electrical stability allows to make mechanical processing of the material and use it for construction parts of electrical equipment. Glass reinforced plastic articles on the basis of electric insulation materials in electric insulation and mechanical properties exceed all the materials from organic fibers, can operate in conditions of high moisture, high temperature – up to 3500С. Glass fabrics for production of flexible insulation. Fine electric insulation glass fabrics are used for production of varnished glass fabrics, micanites, micaceous laminates and other micalike materials and flexible insulation. Materials on the basis of fine electric insulation glass fabrics are a laminated electric insulation material manufactured by the method of mechanical gluing of mica with glyptal, silicon-organic, oil-bitumen gluing varnish with further hot premoulding and have superb electric insulation properties, which have found wide application as an electric insulation material in electrical machinery, units of equipment and in power engineering in general.
Hersteller: Polozk-Steklovolokno AG
Schützende Textilien & Fasern
-
Fabric EN
EN reflective fabrics reflect light back in the same direction. This effect can be checked by placing the card in a dark room and lighting the samples with a torch at eye level. Under the microscope the material is shown to be full of glass microspheres with very high-level refraction that is evenly distributed. The result is very high optical performance. The reflective fabric of the Flashlite EN series is inserted into safety clothing. It is suitable for worker on the road at night in low visibility conditions, as it can be seen from hundreds of yards away. Flashlite EN meets Italian and EN471 European standards and is exceptionally resistant. This fabric can be used to make light or heavy piping and tapes at any width. It is available in the following qualities: EN401 grey, 25 washes resistance, 107 cm width EN402 grey, 50 washes resistance, 107 cm width EN403 grey, 25 washes resistance, 107 cm width EN406 grey, hot-melt, 100 cm width EN407 white, hot-melt 100 cm width EN 415 grey, 100% polyester, 107 cm width and can be cut in all widths.
Hersteller: I.B.R. Industria Bergamasca Rifrangenti S.r.l.
Reflektierende Textilien
-
Fiber
Staple fibres in polyester, polypropylene & bicomponent for manufacturers of pillows, duvets, quilts, needlepunched, spunlaced, airlaid, wetlaid, carded thermobonded & chemical bonded nonwovens.
Hersteller: Fiberpartner ApS
Stapelfasern
-
High temperature resistance ceramic fiber texitles
Up to 1000°C degreeCeramic fiber woven cloth-Vermiculite coating-Aluminum facedCeramic fiber braided tape & ropeCeramic fiber twisted ropeCeramic fiber yarnCeramic fiber sleeving Ceramic fiber
Hersteller: Ningbo Firewheel Thermal Insulation & Sealing Co.,Ltd.
Brandschutz-Fasern
-
Industrial nets - Industrienetze
Huck Industrienetze Kaum ein Material erfüllt die vielfältigen Erfordernisse des innerbetrieblichen Bereichs so variabel und kostengünstig wie das Netz. * Abdecknetze und -planen, Ladungssicherung * Palettenregal-Sicherungsnetze * Heben, Zurren, Verladen * Papierfangnetze * Schutz- und Stoppnetze * Verschiedene Netze * Verschiedene luftdurchlässige Planen * Drahtseilnetze, Industrie- und Strickleitern * Lichtnetz * Haus + Garten/Freizeit * Skipistennetze/Schneefangzäune
Hersteller: Sächsische Netzwerke Huck GmbH
Gewebte Netze
-
Isomex(r) AV Soft
Duflot Industrie offer you a new soft anti vandal protection for seats in public transportation. Isomex® AV Soft is more flexible and therefore more comfortable and fits on all complex shapes, even on bucket seats. Isomex® AV Soft can also be used in personal protective equipment as a soft but strong protection to knife attack. Isomex® AV Soft WQB 5101 Weight - 680 g/m2 Thickness (0,5 kPa) - 4,6 mm Laceration resistance - NFF 31118 - Pass the 150N test Fire reaction - NFF 16101 - M1 Smoke classification - NFF 16101 - F1 Comply with NFF 31118 and EN 45545.
Hersteller: Duflot Industrie S.A.S.
Schützende Textilien & Fasern
-
LAVAproTM
What is LAVAproTM? The next generation of personal protective fabrics! LAVAPROTM was developed by Utexbel in close cooperation with Lenzing AG. LAVAPROTM exists in a wide range of weights and protection levels. protection lifetime long! LAVAPROTM is produced using inherent flame resistant fibers, resulting in fabrics, which provide protection over the lifetime of the garments. LAVAproTM – powered by Lenzing Fr ® Main components in the LAVAPRO TM fabric are Lenzing FR ® and Para-Aramid. Thanks to the properties of Lenzing FR ® protection and comfort are maximized to a new level of performance. Protection Less burns – better protection! Extensive manikin testing at independent testing institutes simulating flash fire exposure, have confirmed that garments made out of LAVAPROTM 260 show amazingly low amounts of transferred energy, less second degree burns and no break open compared to other available materials of the same weight. LAVAPROTM 260 fabric feels immediately cool even after severe flame and heat exposure. Unique LAVAproTM „Air-Cushion-Effect“ Unlike other materials LAVAPROTM garments do not shrink when exposed to flash fire. The garment is even expanding during flame exposure, forming a unique phenomenon of „Air-Cushion-Effect“. LAVAPROTM fabrics protects against electric arcs and molten iron splashes. Comfort LAVAproTM is inherently comfortable! Wearing comfort in protective clothing is an important criterion. Workers do not accept to wear uncomfortable protective clothing. Lenzing FR ® fiber, the major substance in LAVAPROTM fabric provides not only softness and a cool feeling on the skin, but also excellent moisture management performance. For the evaluation of comfort parameters, a wide range of tests have been carried out including the skin model (hot plate) and other testing methods, to give information about the cool touch of the fabric, air permeability, moisture absorption capacity and drying speed. The outcome of these tests was, that LAVAPROTM offers superior body climate control and moisture management properties, compared to other materials, in the same weight, available on the market. Better physiological performance! The excellent body cooling properties of LAVAPROTM during physical action, resulting in a higher physiological performance, as body cooling is essential to avoid heat stress and over-heating. End-users select LAVAPROTM because it provides a higher level of protection, and at the same time higher wearing comfort and flexibility. LAVAproTM approved performance you can trust on! The strong alliance of Utexbel and Lenzing, results not only in a premium high performance fabric but also provides safety and peace of mind to the end-user. Standard LAVAproTM 260 EN ISO 14116 Heat and Flame Protection 3 / 50l / 75 EN ISO 11612 Heat and Flame Protection A1, A2 Ltd. Flame spread B1 Convective Heat C1 Radiant Heat E3 Liquid Iron Splash F1 Contact Heat EN ISO 11611 Protection against weld sparks Class 1 EN ISO IEC 61482-2-1 Electric Arc Protection Class 1 : 4kA EN ISO IEC 61482-1-1 : ATPV 10.0 cal/cm2 EN 1149-5 Electrostatic Properties Optional ISO 17493 Heat Shrinkage 180°C, 260°C Pass Textile Durability Warp / Weft Tenacity / N (EN ISO 13934-1) 1700 / 1200 Tear Strength N (EN ISO 13937-2) 70 / 70 Sustainability / Ökotex Standard 100 Class II Weight 260 g/m²
Hersteller: Utexbel NV
Brandschutz-Fasern
-
LHV0001
LHV0001 LHV0001
Hersteller: Asia Sun (Taiwan) Inc.
Schützende Textilien & Fasern
Einträge 1-10 von 36
1/4
