Startseite
Bitte benutzen Sie Ihr MyAccount Passwort der Messe Frankfurt
Architektur
Einträge 11-20 von 139
2/14
-
Basaltfaser
Basaltfasern sind ein reines Naturprodukt. Es werden keinerlei Additive zugesetzt. Bei der Herstellung werden keine chemischen Veränderungen vorgenommen. Die Schmelze und das Faserziehen sind rein physikalische Prozesse. Dies bietet eine Reihe von Vorteilen für die industrielle Weiterverarbeitung: Keine Zulassung nach der europäischen REACH-Verordnung erforderlich Problemlose Recycelfähigkeit am Ende des Produktlebenszyklus Ressourcenschonende, effiziente Herstellung aus reichlich vorhandenen, natürlichen Materialien
Hersteller: TEXSALT - Forum Technologie & Wirtschaft e.V.
Technische Fasern
-
Binder+ fibre
Binder+ fibre binds mortar mixture components, creating a highly cohesive 3-dimensional network with enhanced mechanical performance and durability.
Hersteller: FISIPE
Technische Fasern
-
Bioweedstop
100% bioabbaubaren Faser Anwendung : Unkrautkontrole 100% Biofaser ( PLA ) kompostierbar ( am Ende des Lebensdauer ) schwer entflambar sehr UV-stabil ( soll man nicht abdecken mit Mulch oder Kies ) mehrere Ausführungen abhängig der Anwendung
Hersteller: De Saedeleir
Technische Fasern
-
BondBarrier
BondBarrier™ composites are a family of affordable, high performance fabrics engineered as Chemical and Biological barriers against manmade and environmental threats utilizing Saint-Gobain CoreTech™ Barrier Membrane (Patent Pending). These composites are designed to provide a wide range of protection against chemical and warfare agents. BondBarrier has been tested and proven to pass HD and VX agents under SD protocol for 72 hours. These composites are constructed to meet the strictest physical requirements of military performance standards, including flame resistance, blackout, and mildew resistance. BondBarrierTM composite family currently consists of a range of products including, but not limited to, exterior wall/floor, liner, plenum, and ducting. These composites were developed to allow standard fabrication welding techniques to be utilized, including RF, hot air, hot wedge, and hot bar. BondBarrier has been tested in the US per TOP 8-2-501 Method 4.3.4, MIL-STD-282 TM 204 & 206, ASTM F739 passing all requirements. TNO Defence, Security and Safety performed liquid tests with mustard agent (HD) and VX on BondBarrier. Liquid tests with HD and VX (1x100 μl, SD protocol, 37 °C, 72 hours) were performed in triplicate on the fabric. Final report dated November 27, 2009 proved no breakthrough at 72 hours.
Hersteller: BondCote Corporation
Zelte
-
BOUTIQUE
Launched in 2011, The Boutique Collection is woven in Pure Merino Lambswool, the premium quality wool fibre produces a naturally finer feel and softness, resulting in a fabric of supreme luxury. This collection is inspired by contemporary urban living with a mix of chalk stripes, sleek Prince of Wales checks, jazzy solids and wonderfully stunning plaids. Luxurious colours, including a fantasy fuchsia story and a striking lime and aqua combination, softened with more sedate and natural shades, offer a palette to complement any room. Made in the UK 100% Merion Lambswool All fabrics meet BS5852 part 1, ignition source 0 (cigarette) and ignition source 1 (match) FR for upholstery. All fabrics meet BS5867 type B FR for contract curtains. All Fabrics meet BS 5852 Part 2. Crib 5 contract upholstery. All fabrics except Notting Hill Stripe and Carnaby Stripe achieve 30,000 rubs on martindale abrasion. Notting Hill Stripe and Carnaby Stripe achieve 40,000 rubs.
Hersteller: Abraham Moon & Sons Limited
Textilien & Verbundwerkstoffe für Innenausbau & -ausstattung
-
Caracas
Composition: 100%Virgin Wool NZ fibre Count:from Nm 7 to Nm 8,3 Other features: Luxury aspect, softness, high abrasion, suitable for piece-dyeing Application:Contract market (sittings and panels)
Hersteller: FILATURA C4 S.r.l.
Technische Fasern
-
Carbon Fiber
Carbon Fiber become an increasingly notable material used in structural engineering applications for over past two decades. Its use in industry can be good for retrofitting to strengthen existing structures or as an alternative reinforcing (or prestressing material) instead of steel from the beginning of the project. Used in industry can be good for retrofitting to strengthen existing structures or as an alternative reinforcing (or prestressin
Hersteller: DJIC Limited.
Textilarmierte Strukturteile
-
CHARISMA
Charisma is a luxurious viscose velvet, one of our best sellers. It’s a multipurpose fabric. More than 40 colours are available
Hersteller: Magniarredo SpA
Textilien & Verbundwerkstoffe für Innenausbau & -ausstattung
-
CHARISMA
Charisma is a luxurious viscose velvet, one of our best sellers. It’s a multipurpose fabric. More than 40 colours are available
Hersteller: Magniarredo SpA
Textilien & Verbundwerkstoffe für Innenausbau & -ausstattung
-
Cinefelt(r)
In the UK and in France, seats in public buildings are tested fully assembled. BS 5852 uses a calibrated burning crib called CRIB 5, while NF D 60 013-AM18 simulates a 20 g paper bag burning. In these tests, flammability smoke emission and weight loss are measured. To CRIB5 test, we recommand CINEFELT® 250 gsm. CINEFELT®100 gsm is required to comply with the french regulation. Our complete range of fireblockers will meet your needs. Do not hesitate to contact us about DUFELT®and ISOMEX® product range. Cinefelt 250 gsm Thickness - 4 mm NF P 92 503 - M1 AM 18 (France) - OK BS 5852 (Crib 5) - OK
Hersteller: Duflot Industrie S.A.S.
Isolierungen
Einträge 11-20 von 139
2/14
