Square spotlight for outdoor installation on wall, pavement or ceiling.

Configuration: die-cast aluminium structure with a wiring unit and an emitting unit connected through a pivot allowing rotation around the horizontal and vertical axis. All aluminium elements are coated with polyester powder after chromium-phosphate conversion coating pre-treatment. The emitting unit is equipped with a transparent glass with silkscreen border fixed to the aluminium structure through a robotic gluing system. The wiring unit has stainless steel screws and a silicone gasket. The pivot has a graduated disk and a stainless steel screw to set the position of the emitting unit along the vertical axis while the horizontal adjustment is based on a self-locking mechanism. A steel fixing base allows installation on wall.

Versions:

Emitting unit: square adjustable emitting unit with tempered transparent glass with silkscreen border 

LED light emission: narrow beam 10° / medium beam 30°

Wiring unit: integrated power supply

20W CDM-Tm 20W Metal halide lamp (electronic ballast)

9x1W LEDs module (cool white 6000K, natural white 4000K, warm white 3000K). 220÷240V power supply included

Square emitting unit: 125x125x60mm

Square wiring unit: 125x125x60mm

Protection rating: IP65;

In compliance with EN 60598-1

Class of insulation: I

Installation: wiring through a EPDM rubber cable gland for Ø < 9mm cables. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Installation on wall requires a dedicated fixing base supplied with the luminaire.

Colours available: White, Aluminium,  Anthracite,  Black, Rust-red