The 788-LD+ is an industrial four channel compact DMX dimmer pack that can be used in any DMX-512 environment. Each channel will handle a load up to 5 Amps and each channel can be set as a switch or as a dimmer and both a low resolution (8 bit) or high resolution (16 bit) dimmer can be selected. The dimmer fully supports the RDM, ANSI E1.20 protocol. On top of that, the dimmer has no fans and therefore is completely silent.

Features

4 independent channels through DMX-512 protocol. 8 DMX addresses are used in 16 bit mode. Dim, switch, off or on mode for each channel. 0 to 100% dimming in 256 or 1024 steps. 5 Amp per channel. Both ordinary and halogen light (or other inductive loads).

Protection 

No fuses, thermal protection scheme, short circuit protection. No replaceable parts inside. Shock resistant, extruded aluminium housing.

Power supply

100-240V AC, 50/60Hz, Max. load 5 Amp per channel at 25º C, 16A total load

Min. load 0.05 Amp (add 10K resistor at small loads).

Connectors

Two 5-pole XLR DMX connectors, four GST18-3 socket outlets.

Other features

Produced under ISO 9001 quality control. No fans, no noise. Build using thick extruded aluminium for a very strong housing. Full ANSI E1.20 RDM support.