Startpage
Please use your MyAccount password of Messe Frankfurt
Electronics
Entries 1-10 from 33
1/4
-
-
AC 166 - The safe, flexible Installation
Office buildings, stands at fairs or big stores: in all applications where flexibility, safety and cost efficiency is a priority, our connecting system AC 166 is the ultimate solution. Constantly increasing labour costs make the labour time needed to install common installation materials a costly element of the project. The AC 166 system allows to reduce these costs to a minimum. Components within luminaires, devices and sockets, pre-assembled cables and distributors permit a continuous „plug and play“ installation. Laborious cutting to length and stripping as well as connecting by conventional installation material can thus be waived.
Manufacturer: Adels-Contact Elektrotechnische Fabrik GmbH & Co. KG
Connecting Terminals
-
Busbar connections in type tested standard components
Manufacturer: GA Energieanlagenbau Nord GmbH
Bus Bar Systems
-
Capacitive leakage detectors of the Leckmaster range
with integrated cable break monitoringor electrically conductive and electricallynon-conductive liquids; can basically be used forthe detection of all low-viscosity liquids for suchtasks as signalling the presence of fuel oil on thefloor of a tank room or in a collection tub locatedunderneath a fuel oil burner.The Leckmaster leakage detectors consist of 2 components:- a COW/L or OWE 2/C sensorand- a Leckmaster 101 relay.The COW/L and OWE 2/C sensors are designed for connection to the Leckmaster 101 relay. They work on a capacitive basis. If several sensors are used, a separate Leckmaster 101 relay is required for each sensor.
Manufacturer: Jola Spezialschalter K. Mattil & Co. KG
Control Relays & Switches
-
Compensation systems in filter circuit technology
Compensation systems are an essential part of our power supply. Designed as long-term capital goods they are expected to work reliably over many years. They guarantee the reduce of reactive power und thus optimise the invested energy. Compensation systems relieve electric generators and transmission systems and reduce purchasing costs for electric current. Apart from a quick and efficient reduce of costs as regards to power supply, compensation systems contribute to the active protection of the environment. EAS Schaltanlagen GmbH develops and produces a large range of reactive compensation systems. By using latest technologies we are able to offer solutions even for the most difficult network conditions.With our longtime experience and know-how we can offer optimised systems according to the technical and economic demands of our clients.
Manufacturer: EAS Schaltanlagen GmbH
Low Voltage Switchgear Components
-
E LINE KAM/KAP DISTRIBUTION BUSBAR
HORIZONTAL ENERGY DISTRIBUTION BUSBAR 25A - 63A PLUG-IN BUSBAR SYSTEMS PRODUCT OVERVIEW (E-Line KAM / KAP) 1 - The busbar sytem shall have rated current levels between 25A and 63A and shall have copper conductors. 2 - Plug-in busbar system shall have one of the following conductor number and configurations; a) 2 conductors : L1 / N / Housing (Earthing) b)3 conductors : L1 / N / PE + Housing (PE conductor and housing are connected) c) 4 conductors : L1 / L2 / L3 / N / Housing (Earthing) d) 5 conductors : L1 / L2 / L3 / N / PE + Housing (PE conductor and housing are connected) Housing shall be used as earth conductor. 3 - The rated insulation voltage of the system shall be 630 V. 4 - On a three meter standard length there shall be four plug-in points. 5 - The conductors in the housing shall be continuously insulated and only peeled off on the plug-in points to create contact area. 6 - There shall be insulator supports at the plug-in points. 7 - The conductors shall be of electrolytic copper and continuously tin plated. 8 - Each current rating of the busbar system shall have a type test report according to IEC 60439/2. The type test reports shall be from an internationally accepted third party laboratory. 9 - Joint of the busbar shall slide into each other; joint contacts shall be silver plated. To ensure a safe joint contact there shall be springs on both sides of joint contacts. 10 - IP Protection degree of the busbars shall be 55. 11 - The housing of the busbar shall be manufactured of 0,50 mm thick galvanised sheet metal. 12 - Contacts of the tap offs shall be off jawed structure, which touches the conductors on both sides. The contacts shall also have springs. 13 - Manufacturing facility of busbar systems shall have ISO 9001 and ISO 14001 certification.
Manufacturer: EAE Elektrik Asansör End. Insaat San. ve Tic. A.S.
Bus Bar Systems
-
E LINE KB COMPACT BUSBAR
COMPACT POWER DISTRIBUTION BUSBAR from 800 A to 6300 A Standards & Certification: - Busbar system shall be designed and manufactured as per IEC 60439-2 standard. Each busbar rating shall have a separate type test certificate from an independent internationally accredited laboratory. - Manufacturing facility of busbar systems shall have ISO 9001 and ISO 14001 certification. - Each product shall have a “Type Label”, which indicates the brand, type of the unit, conductor number and electrical details. General Structure of Products: - Busbar system shall have “Sandwich-Compact” structure. Aluminium or Copper conductors shall be tin plated along the entire length. Housing shall be 1,50 mm galvanized steel or if required housing shall be RAL7038-Electrostatic painted. Electrical Characteristics: - Busbar systems nominal insulation voltage shall be 1000V. - As per ampere rates, minimum short circuit values shall be like below; For Aluminium Conductors; 800, 1000 ve 1250A : 1sec/rms-50kA, Peak-110kA 1600, 2000 ve 2500A : 1sec/rms-100kA, Peak-220kA 3000A and above : 1sec/rms-120kA, Peak-264kA Housing and Structure: - Busbar system shall have “Sandwich-Compact” structure. - Compact structure of the housing shall be provided by M6 screws applied at every 10 cm along the entire length. - Busbar system shall have all necessary accessories (elbows, offsets, panel-transformer connections, reductions, etc). Manufacturer shall supply special dimensioned units in short time, if the project conditions requires. - For horizontal runs, a horizontal expansion unit shall be used at every 40m and expansion points of the building. - For vertical applications, a vertical expansion unit shall be used at every floor. Busbar system shall be rigidly fixed by supports at every floor.
Manufacturer: EAE Elektrik Asansör End. Insaat San. ve Tic. A.S.
Bus Bar Systems
-
E LINE KO SEGREGATED BUSBAR
SEGREGATED BUSBAR SYSTEM from 160 A to 800 A Standards & Certification: - Busbar system shall be designed and manufactured as per IEC 60439-2 standard. Each individual rated busbar shall have separate type test certificate from an independent internationally accredited laboratory. - Manufacturing facility of busbar systems shall have ISO 9001 and ISO 14001 certification. - Busbar system shall have CE marking. - Each product shall have a “Type Label”, which indicates the brand, type of the unit, conductor number and electrical details. General Structure of Products: - Busbar system shall be Air-Insulated and Plug-in type. Aluminium or Copper conductors shall be tin plated along the entire length. Housing shall be galvanized steel or if required RAL 7038-Electrostatic painted. Electrical Characteristics: - Busbar systems nominal insulation voltage shall be 1000V. - As per ampere rates, minimum short circuit values shall be like below; - Temperature rise shall be maximum 50K over 40°C ambient temperature for both tin plated Aluminium and Copper conductor busbars. 160A : 1sec/rms-10kA, Peak-17kA 250 and 315A : 1sec/rms-15kA, Peak-30kA 400 and 500A : 1sec/rms-30kA, Peak-63kA 600A and above : 1sec/rms-35kA, Peak-73,5kA Housing and Structure: - Busbar system shall be of air insulated type. The bars shall be supported by insulators installed into the housing at every 25 cm. - On a three meter standard length busbar the distance between the plug-in points on one side shall be 50cms. The points shall be on both sides of the busbar making the average distance of plug-in points 25cm. - To prevent wrong alignment of the phase sequence during installation there shall be mechanical barriers on the joint that shall ensure correct mounting. - IP Plug-in covers of the busbar system should be hinged.Plug-in windows shall have automatic shutter system. This shutter shall open automatically when the earth contact of tap-off box is inserted. - Busbar system shall have all necessary accessories (elbows, offsets, panel-transformer connections, reductions, etc). Manufacturer shall supply special dimensioned units in short time, if the project conditions requires.
Manufacturer: EAE Elektrik Asansör End. Insaat San. ve Tic. A.S.
Bus Bar Systems
-
E LINE KX COMPACT BUSBAR
Energy Distribution System from 630 A to 6300 A Standards & Certification: -Busbar system shall be designed and manufactured as per IEC 60439-2/1 standard, which requires below listed tests. Each busbar rating shall have a separate type test certificate from an independent internationally accredited certification organisation including below tests: 8.2.1- Temperature Rise Limits, 8.2.2- Dielectric Features, 8.2.3- Short-circuit Duration, 8.2.4- Effectiveness of Protection Circuit, 8.2.5- Clearances and Creepage Distances, 8.2.6- Mechanical Operation, 8.2.7- Protection Degree, 8.2.9- Resistance of Insulation Material to Abnormal Heat , 8.2.10- Structural Duration, 8.2.12- Crushing Resistance, 8.2.13- Electrical Characteristics, 8.2.14- Flame Propagation, 8.2.15- Fire Resistance (Fire Barrier). - Busbar system shall have CE marking. -The manufacturer of busbar system shall have ISO 9001 and ISO 14001 certification. -Each product shall have a “Type Label” including coding system, which identifies the brand, type of the unit, number of conductors and electrical details. The same coding shall be on the related certificate and catalogue. - Housing: -Busbar system shall have “Sandwich-Compact” structure. Conductors shall be packed and placed into the housing without leaving air gap in order to provide low reactance. -Housing shall be made of thermal processed, extruded aluminium, RAL7038-Electrostatic painted. -Compact structure of the housing shall be provided by M6 screws applied at every 19cm along the entire length. -The sandwich-compact structure shall continue at the plug-in points too. There shall not be air gap between conductors at the plug-in points. Joint Structure: - Electrical and mechanical connection shall be made by placing conductor joints into the joint blocks of the connected conductors and followed by tightening and fastening of the joint bolts. Protection: - Protection degree of the housing and joints shall be IP55/IP67.
Manufacturer: EAE Elektrik Asansör End. Insaat San. ve Tic. A.S.
Bus Bar Systems
-
Linect
The future name of pluggable connections is Linect® – a universal connecting system for the installation of built-in luminaires. Luminaire manufacturers and installers benefit from the great advantage of reduced complexity since luminaires provided with a Linect® logo may be combined with any Linect®-labelled plug and socket connectors. With its plug-in adapter (see page 10) our AC 166 series is part of the Linect® system.
Manufacturer: Adels-Contact Elektrotechnische Fabrik GmbH & Co. KG
Connecting Terminals
Entries 1-10 from 33
1/4
