Refine category

Machines

Bedding & Upholstery Machinery (3) Bonding & Seperating Technology (16) Cleaning (11) Coating Equipment (7) Cutting (10) Disposal & Recycling Technology (6) Drying, Cooling & Thermo-Fixing (3) Finishing Technology (29) Infrared Heaters (8) Laboratory & Measuring Equipment (12) Laminating Equipment (12) Machinery Parts (24) Printing (11) Punching, Perforating & Creasing (1) Sealing & Gluing (1) Spinning (4) Steam Generators (1) Surface Treatment Machinery (9) Weaving (9) Welding Machines (16)

Refine search by:

Only from this country:

Only from this trade fair:

Only product novelties

Clear selection

Productpilot Login

New registration Password forgotten

Please use your MyAccount password of Messe Frankfurt

Textiles & Leather

Entries 1-10 from 842

1/85
  • 200/4
    This new machine developed by SIMA Group represents an important novelty in the field of rope layers, because 200/4 is suitable to produce small diameters, from 2 to 6mm, without investing high capitals, therefore with the max economical conveniennce. The 200/4 is made of a feeding section, running with 3 or 4 strands, and of a take-up section, which is the GS2000, a more than tested machine. The system conceived in this way leaves complete freedom to the customer concerning its use, because it is evident it can be used as a rope layer or, using the only take-up section, as a twister. The 200/4 runs on the principle of the 2 twists in the feeding section and 2 twists in the take-up section; mechanically speaking, cynematism where introduced, which have been considerably simplified, with benefits to the noise level, which is within what foreseen by the international regulations, thanks also to the insulation. ADVANTAGES: •    Set-up of 200/4 through the control panel of GS2000 •    Electronic change of the pre-twist ratio •    Device to detect the strand breakage •    Immediate change of the rotation direction S or Z •    New cynematism with consequent noise reduction •    Feeding up to 4 bobbins of 12" x 12", for a total of 160000 den We wish here by to point out that in its range of rope layers SIMA Group has another machine, with the same diameter, the 300/3 and 300/4, which is not replaced, but comes alongside. In fact, the 200/4 for ropes of Ø= 3mm produces 16 Kg/h while the 300 produces 29 Kg/h, t is therefore clear that the 300 is extremely valid and unreplaceable for the large productions.
    Manufacturer: SIMA S.R.L.
    Machines

    Notice

    Details

  • 27 P Programmable roll slitting machine
    The model 27 P has been designed for the sectioned cutting of different fabrics rolls, lengths and diameters such: fabrics, glass fiber, coated textiles, lycra, non woven, carpet, synthetic leather, adhesives, vinyl, etc.   Programming system of lengths and quantities. Programmable blade sharpener. Variable roll speed for the roll rotation. Roll support axle (available in different diameters). Reversible roll rotation. Automatic blade lubricator.
    Manufacturer: Oteman-Advanced Cutting Technology, S.A.
    Machines

    Notice

    Details

  • 29 A Automatic cutter for technical fabrics
    Automatic cutter for technical fabrics, easy to use and highly productive. Cuts acrilic, PVC, screen, sunscreen textiles, carpet, laminated textiles, etc. perfectly squared. Equiped with two cutting heads (ultrasonic / crush-cut) that can be selected automatically depending on the material to cut, without the need of changing them manually. Available in different dimensions and configurations.   Multifunction cutting head. (ultrasonic/crush-cut) Touch screen. Fabric feeder with automatic fabric alignment. Pneumatic clamps to fix the fabric. Variable cutting speed. Fabric inspection zone.
    Manufacturer: Oteman-Advanced Cutting Technology, S.A.
    Machines

    Notice

    Details

  • 3D shapes HF welder - CORNA
    Special column design HF welding machine for making small shape multilayer (up to 8 layers) welds for technical textiles products where conical, corner and multidimentional shapes are required. The tooling (electrodes) can have custom shapes - rectangular, round, triangular or oval - depending on the final product look.  SoftEL frexible electrode can be also used for changeable leyers welds (e.g. going from 2 layer weld to 8 layer weld and coming back to 2 layer weld again). Connecting 3D corners can be achieved easily with the column design of the welding head and footing. Operation is easy and intuitive. Machine is equipped with free standing control panel and HMI touch screen.  IT can also be put on wheels for ease of movement and placing in desired for comfort of production place. Hi-Q reliable HF generator with 4kW of output power provides consistent welds and minimum RF exposure for operator. Machine is made to CE regulations and tested according to ISO17025. Model CORNA 4 Output power 4 kW Instaled power 6 kW Main fuse 25 A | 32 A Power supply 400 V; 50 Hz Working frequency 27,12 MHz (+/- 0,6%) Metal-ceramic Air Cooled power triode HF Auto-tunning System (ATS) Anti - flash system PLC control panel  remote panel touch screen HMI Electrode pneumatic press (at 0,4 - 07 MPa) 80 - 300 kG Compressed air consumption 12 nl/cycle Electrode platen working stroke 150 mm Electrode platen dimensions 100 - 110 mm Welding surface (max) 120 cm2  
    Manufacturer: ZEMAT Technology Group Sp. z o.o.
    Welding Machines

    Notice

    Details

  • 3 In 1 Multi Purpose Cutting System
    Different types of desktop & handle-held trimmer for your selection Hand-held no-slip handle design for comfortable and confident cut Ideal for cutting special shapes on paper or other material Suitable for home and office use Cutting Board  Guillotine Trimmer 4pcs of rotary cutter blades 
    Manufacturer: Midas Enterprises (Far East) Ltd.
    Manual Cutting

    Notice

    Details

  • 460XE
    Manufacturer: Georg Sahm GmbH & Co. KG
    Machines

    Notice

    Details

  • 467 Form Finisher
    Tensioning form finisher for connection to steam supply, with front, rear, side and side-rear clamps, steam superheater, oleo-pneumatic bust movement, computer-controlled finishing programmesand switch-off controls for unnecessary functions, manual bust rotation of 350°.
    Manufacturer: BARBANTI S.r.l.
    Machines

    Notice

    Details

  • 483 - 488 Shirt Finisher
    Tensioning shirt finisher, for connection to main steam (483) or electrically heated (488), for the finishing of dry and wet shirts, with computer-controlled finishing programmes, rounded cuff clamps for long and short sleeves, joysticks for sleeve arm height adjustment, energy-saving device, shoulder and cuff vent heated plates.
    Manufacturer: BARBANTI S.r.l.
    Machines

    Notice

    Details

  • 5-layer coextrusion pilot plant
    Fast, customized and accurate Our new, state-of-the-art high-tech pilot plant is the perfect platform for rapidly developing new multi-layer film adhesive applications. It gives you precision control over the layer structure of the film adhesive, so that you can customise it to your needs. Whether you wish to incorporate an additional function or a protective film, these laboratory-scale film rolls are precision-wound to perfection. How you benefit – Transfer of adhesive expertise, and advice – Rapid development – Customer-specific development, with low outlay on costs and materials – Customised layer structure of the adhesive films – Sample films for suitability tests – High-quality film adhesives on a laboratory scale – Recipes can be tested for extrudability and compatibility prior to production Technical specifications – 5 modern single-screw extruders – Screw Ø 30 mm, 3-section screw and mixing section – Gravimetric throughput control – Layer thicknesses adjustable from 4–5 μm to 25 μm per layer – Pellet metering (no liquids or powder) – Web-edge control, side cut, 2 winding points – Film width of 200-600 mm (film opening!) – Flatness unit with reversion over turning bars to ensure planarity of straight-edge film rolls – Die head of plate construction – Extrusion of halogenated plastics possible – Overall throughput variable from 5-20 kg/h Applications – Multi-layer film adhesives in up to 5 layers – Technical-grade films with O2 and H2O barriers – Films with a high-melting centre-layer – Membrane and film adhesives on PP or PE substrate – Black-out film adhesives – Production of film adhesives with difficult raw materials and protective films – Combination of different adhesives with barrier layers  
    Manufacturer: Collano Adhesives AG
    Membrane Finishing

    Notice

    Details

  • 745-35 A Nähanlage mit CNC-Schrittmotorentechnik zum Vornähen von geraden und schrägen Tascheneingriffen
    745-35 A – the universal one – unbeatable in flexibility for straight and optionally also for slanted piped pockets, flap pockets and welt pockets with manual feeding of piping strips, flaps and additional parts; optionally with fully automatic flap slant recognition; with automatic corner knife adjustment; optionally with stacking facilities. Single-piped pockets in hind trousers, additional parts: piping strip, pocket bag (positioned underneath) 745-35 A approx. 1.900 – 2.200 in 480 min. additional parts: piping strip, pocket bag (positioned underneath) 745-35 A approx. 1.900 – 2.200 in 480 min. Single- or double-piped pockets with flap in hind trousers, additional parts: flap, piping strip, pocket bag (positioned underneath) 745-35 A approx. 1.300 – 1.600 in 480 min. Lining inside pockets with lining flap triangle and pocket bag, additional parts: piping strip, lining flap triangle, two pocket bag halves 745-35 A approx. 1.200 – 1.400 in 480 min. Slanted single- or double-piped pockets with flap and pocket bag in jackets (unicoloured), additional parts: flap, piping strip, pocket bag (not positioned over the flap) 745-35 A approx. 1.200 – 1.500 in 480 min.  Rectangular single- or double-piped pockets with flap and pocket bag in jackets (unicoloured), additional parts: flap, piping strip, pocket bag (not positioned over the flap) 745-35 A approx. 1.200 – 1.500 in 480 min. Single- or double-piped pockets with flap and pocket bag in jackets (patterned), additional parts: flap, piping strip, one pocket bag (not positioned over the flap) 745-35 A approx. 700 – 900 in 480 min.
    Manufacturer: Dürkopp Adler AG
    Machines

    Notice

    Details

Entries 1-10 from 842

1/85

You can manage and look at your entries under "Bookmark".

Please fill out the marked form fields to activate your account.