Startpage
Please use your MyAccount password of Messe Frankfurt
Textiles & Leather
Entries 11-20 from 973
2/98
-
AB-1351
AB-1351 <1-needle, automatic belt-loop attaching machine> ●Product overview The AB-1351 is best suited to the sewing of belt loops on slacks and casual pants. This automatic sewing machine sews various kinds of belt loops with flexibility by utilizing the seven different sewing patterns it incorporates. ●Features • Since the AB-1351 uses the highly operable new operation panel (IP-420), it is possible for the operator to change the sewing shape and sewing size of belt loops, change the sewing pattern, and change detailed settings of the sewing position, etc. through the operation panel with ease. In addition, cycle sewing can also be set. • Access to data previously stored in the memory of the operation panel is possible, thus shortening the setup time when re-using the same data as that stored in the memory. The operator needs only to place a garment body on the sewing machine. He/she therefore has idle time while the sewing machine is sewing belt loops on the garment body. This means that the operator is then able to attend to two units of the AB-1351 at one time by placing another garment body on one machine while the other machine is engaged in sewing, thereby contributing to further increased productivity. • In the case of standard sewing machines (general-purpose sewing machines), operator skill is required to sew belt loops exactly according to specified sewing dimensions and seam allowances (the allowance to be determined taking the belt thickness or other influencing factors into account) with consistency. On the other hand, the AB-1351 has adopted JUKI's unique twin-drive type belt-loop feeder mechanism. The belt-loop pulling clamp and the belt-loop draw-out roller operate in sync with each other, thereby ensuring accurate belt loop lengths even when using soft and elastic materials. With this mechanism, even an inexperienced operator is allowed to carry out belt-loop attaching with consistency while maintaining adequate seam allowances as in the case of skilled operators, thereby producing beautifully-attached belt-loops with no variation in quality.
Manufacturer: JUKI CORPORATION
Machines
-
Abrasives
For various cutting machines we can supply the corresponding grinding stones and abrasive belts.
Manufacturer: ESPADA e.K. Cutting Tools
Blades
-
-
adhesive application system
for coating narrow fabrics with hot-melt adhesive complete narrow fabric guidiance adjustable by means of guide system adjustable tension equipment can be flexibly adapted to meet customer requirements
Manufacturer: KTP - Konstruktive Technologie & Produktion
Machines
-
AE-200A
AE-200A ◆Features ● The AE-200A Series comes in two different types; one for joining and one for pin-tucking. The AE-200A comes in the following two different types to enable sewing requiring no skill, to achieve consistent quality and to increase productivity. ● JUKI's unique technology The sensor placed at the top of the manipulator device monitors the material-end position and the manipulator device controls the materials to adjust the seam allowance (material edge width) to a predetermined value. This is JUKI's unique technology. The joining type model has a pair of upper and lower manipulator devices to separately control the upper and lower materials, thereby speedily joining two plies of materials which are different in shape with a consistent seam allowance. The differential feed amount and manipulator pressure are digitally controlled. Programmed sewing in 10 different sections is enabled at the maximum. Difficult joining of materials which has generally required skill can now be performed by numerically inputting upper/lower manipulator pressure values. Programs can be stored in the memory and can be easily invoked when changing sewing patterns, thereby substantially reducing operator manhours. The pin-tucking type model is able to beautifully sew pin tucks at uniform intervals, which is difficult for manual pin-tucking. ● Productivity When sewing a long sewing section, re-arrangement of the materials is not required. The sewing machine automatically and continuously sews the materials without stopping. As a result, the sewing time is reduced and productivity is increased. In comparison with the plastic pattern sewing system and the rail-feed system adopted by competitive models, the AE-200A does not require any changing of plastic patterns or rails at the time of sewing pattern changing, thereby reducing the setup time and running cost. Since the AE-200A does not use plastic patterns, the amount of waste is also reduced. The machine is, therefore, more eco-friendly than the competitive models. The "AC compact-sized servomotor + timing belt drive" system has been adopted. As a result, power consumption is reduced by approximately 5% as compared with JUKI's conventional model.
Manufacturer: JUKI CORPORATION
Machines
-
AGA-2200DP/DPX-series
Fully automatic vertical curtain cutting machine Electronic, programmable, computer controlled cutting machine to cut curtains and voiles to their final drop. Model DP, custom made to a maximum width of 1100 cm at a height of max.600 cm Model DPX, offering the possibility to cut large drop curtains in workrooms with a low ceiling; custom made to a maximum width of 900 cm and a max height of 600 cm. All models fitted with a 3-fold attaching beam to fix the curtain according to the model and design. Easy operation by a multilingual dialogue LCD touch screen. Many options available such as: Pneumatic clamps, extended clamps for lined curtains, UV ink marking device for curtains, blinds and shades, double rod system for simultaneous cutting of face fabric and lining and I/O interface to connect the machine to CurtainPro logistic software for automatic barcode operation.
Manufacturer: Eisenkolb B.V.
Machines
-
A high productivity line concept for needle-punched nonwovens
The web coming from the card needs to be layered to the desired weight. The requirements for this process are constant web quality and high productivity. Trützschler Nonwovens presents the optimized crosslapper EKL 439 with its secure web guiding concept and new control device.
Manufacturer: Trützschler Nonwovens GmbH, Dülmen
Machines
-
Airjet-Cleaners
Airjet Cleaners are used in different textile machines in order to prevent contamination by dust and fly lint.Particular advantages in comparison to similar systems,• the flat stream nozzles are laid out offering an optimal proportion between spraying effect and air consumption• continuous movement over the complete working width• small dimensions• cycle times and travel distance variably adjustable• stationary or mobile operation, simple assembly• working area adjustable• concentrated pressure on travelling nozzle.The use of this cleaning system pays off in practical use by,• less machine stops• less personnel employment• reduced material waste.
Manufacturer: Heinrich Derix Betriebsges. mbH
Weaving
-
-
Airlay Krempel TURBO-UNIT TU
When an even strength ratio MD : CD is desired, airlaid webs are increasingly preferred, particularly for water entangled fine fleece products. The turbo-unit TU is fed either directly or by pre-carded webs. The turbo-roll is equipped with carding segments. aerodynamical web-forming by centrifugal force, doffer fan and suction conveyor lower to medium fiber fineness staple length: approx. 30 - 60 mm web weight: approx. 16 - 250 g/m throughput depending on fiber fineness and fiber type: up to approx. 200 kg/h/m of working width working widths: up to 4.000 mm web speed: approx. 20 - 150 (200) m/min
Manufacturer: SPINNBAU GmbH
Surface Treatment Machinery
Entries 11-20 from 973
2/98
