ALD-E 50.4W DC/DC DALI LED Driver

Product description

Take me directly to Range of services

* Output from 15.75W to 50.4W * LED Driver Current up to 1400mA * Constant Current Output * Digital Address Lighting Interface (DALI) * High Efficiency up to 95% * Continuous Short Circuit Protection * High Reliability * IP65 Protection (Note7)   Note: 1. 3V< Vin - Vout <20Vdc, to keep current accuracy. Nominal Input Voltage: 36Vdc. 2. Ripple and Noise are measured at rated current, Nominal Input and 33Vdc output and 20MHz bandwidth with a 0.1uF ceramic capacitor. 3. Measured at rated current, Nominal Input and 33Vdc output. 4. Acceptable customer modifications.

Contact details

Cincon Electronics Co., Ltd.

14F, No. 306, Section 4, Hsin Yi Road
106 Taipei
Taiwan

Contact

Please log in to view users’s details

Range of services

Take me directly to Our products

INPUT SPECIFICATIONS: Input Voltage: 11-40Vdc /11-50Vdc Input Surge Voltage (1second): 50Vdc max. Input Filter: Capacitor Under Voltage Lockout:  Power up:  8.1Vdc typ., Power down: 6.9Vdc typ.    OUTPUT SPECIFICATIONS: Constant Current Accuracy (note1):  ±5% max. Current Line Regulation (note 2): ±5% typ. Current Load Regulation (note 3): ±5% max. Short Circuit Protection: Constant Current with Auto Recovery Start up time: 150ms max.   GENERAL SPECIFICATIONS: Efficiency:  See Table Temperature Coefficient:  ±0.05%/℃(0~50℃) Isolation Voltage: Non-isolation Switching Frequency: 40-700KHz. Operating Ambient Temperature: -40 ~ 80℃ see Derating Curve Case Temperature: 100℃ max. Cooling: Natural Convection Storage Temperature: -55 ~ 125℃ Operating Humidity: 10%~95%RH non-condensing Operating Altitude: Sea Level to 3000m Vibration: 0~500Hz, 2G 60min./1cycle, period for 3hours, 3 axes Shock: 30g peak, half sine, 6 axes MTBF, MIL-HDBK-217F (25℃): 700Khrs(typ) Dimensions: 1.6x0.93x0.40 Inches(40.6x23.5x10.1mm) Weight: PIN / LW / T: 20g / 23g / 30g Case Material: Plastic Case   NOTE: 1. 3V<Vin-Vout <20Vdc to keep current accuracy. 2. Current line regulation is measured from high line to low line. 3. Current load regulation is measured from high to low operating voltage. 4. Suffix”LW” to the model number with wire type. 5. Suffix” T” to the model number with terminal type and only meets IP20      Terminal: WAGO 250-108 or equivalent; wire range: 16~20 AWG. 6. Acceptable customer modifications. 7. IP65 for model: ALD-EXXX、ALD-EXXXLW. IP64 for model: ALD-EXXXT.

Additional products

Product

LDL25 25W DALI LED Driver

* Universal AC Input 90~264Vac / 200~264Vac * Low AC Inrush Current < 5A * DALI Off consumption...

Cincon Electronics Co., Ltd. 14F, No. 306, Section 4, Hsin Yi Road 106 Taipei Taiwan

Product

LDL40 40W DALI LED Driver

* Universal AC Input 90~264Vac / 200~264Vac * Low AC Inrush Current < 5A * DALI Off consumption...

Cincon Electronics Co., Ltd. 14F, No. 306, Section 4, Hsin Yi Road 106 Taipei Taiwan

Product

BD5T DALI Bluetooth Controller

*Bluetooth 4.0 wireless for DALI systems                  *Simple control through iDALI APP ...

Cincon Electronics Co., Ltd. 14F, No. 306, Section 4, Hsin Yi Road 106 Taipei Taiwan

Product

DMD-160AT Touch Scene Controller

* For DALI System * Using capacitive touch * On/Off Switchable Function * LED Locator Light ...

Cincon Electronics Co., Ltd. 14F, No. 306, Section 4, Hsin Yi Road 106 Taipei Taiwan