The automatic pockets filter has been designed to filter the air continuously and in an over polluted environment with hight dust and micro-fibres concentrations.
The cleaning system consists of intermittent compressed air blowing in counter-current. An electronic control panel controls the timing on and off-of the blowing. Such timings can be manually adjusted with dedicated knobs and can be varied according to the needs. The filter can be positioned both at the in or out flow of their. An easy and safe inspection and an eventual replacement of the filter pockets are assured by means of doors situated at the frontal access in the cleaned area.
The electric valves with the associated pipings are positioned over the compressed air reservoir and protected by a dust preventer door.
The compressed air supply must be degreased and dehydrated.
In the lower side of the filter a conveying hopper complete with discharging chute is installed. The discharging chute allowes the continuous functioning of the filter without stopping for the removing of the accumulated dust.
During the discharging period, the chute makes a dust compression contracting the volume up to about 1/3.Then the compacted dust can be directly discharged in bags or trolleys according to the Customer’s needs.
Usually the pockets filter is realized in six different sizes with single or double chute according to the quantity of material to be discharged.
Emmebi Impianti S.r.l.
Via Pacinotti 15
20060 Pessano con Bornago (MI)
The Fibre Separator is a static machine that, using the inertial effect, is separating the fibre...
The self-cleaning rotating filter MN is designed to filter the air, continuously and in harsh...
The best way to extract coarse particles from large air streams, is to use an appropriate prefilter...