Quarter Panel Hemming TurboXTool

Product description

Take me directly to Range of services

Use air power to bend and close wheel arc flanges of replacement quarter panels. Winner of the Best New Collision Repair and Refinish Product Award at the 2014 Las Vegas SEMA Show, the QHT1A Air Powered Hemming TurboXTool replicates a hammer and dolly motion at high speed, with greater precision, less fatigue and faster results. Up to 80% faster than manual methods based on field trials! Hemming the wheel arc of a quarter panel with this Malco TurboXTool is a smooth, controlled operation. The user can quickly hem replacement quarter panels on late model cars with a range of wheel arc flange widths up to 19.05 mm. A rubber cushioned anvil protects the quarter panel from scratches and scuffs and allows the anvil and stop pegs to be aligned along the finished side of the wheel arc flange while the hammer head works from the backside. A rounded “bull nose” hammer face is used on the initial pass to quickly roll over the flange edge. A change out to the Flat Face side of the hammer head is used to close and seal the flange in one easy pass. The anvil and working hammer may be cleaned of any adhesive residue, resulting from the hemming operation, by using a common solvent. The long-wearing anvil and hammer are also replaceable and easily installed on the job.

Contact details

Malco Products, Inc.

P.O. Box 400, 14080 State Highway 55 NW
55302 Annandale
United States of America

Contact

Please log in to view users’s details

Range of services

Take me directly to Our products

Catalog Number QHT1A
Air Requirements 133L/Min, 6.2 Bar
Maximum Speed 2600 RPM, 2600 TR/Min
Max. Hemming Capacity 0.38-0.76 mm Automotive Steel
Tool Weight 1.59 kg
Replacement Anvil Order No. QHT1RA
Replacement Hammer Order No. QHT1RH
 

Additional products

Product

TurboShear Drill Attachment

Attaches to a corded or cordless drill or impact driver you already own.   A compact, molded,...

Malco Products, Inc. P.O. Box 400, 14080 State Highway 55 NW 55302 Annandale United States of America

Product

TurboShear Air Tool

Compatible with most existing air supplies. A 45°brass elbow fitting (supplied) allows hose...

Malco Products, Inc. P.O. Box 400, 14080 State Highway 55 NW 55302 Annandale United States of America

Product

TurboXTool Door Skin Remover

No more dust, dirt or sparks from time consuming grinding. And no risk of burn marks on the door...

Malco Products, Inc. P.O. Box 400, 14080 State Highway 55 NW 55302 Annandale United States of America

Product

Door Hemming TurboXTool

Efficiently hem the edges of replacement door skins for passenger vehicles and light trucks, with...

Malco Products, Inc. P.O. Box 400, 14080 State Highway 55 NW 55302 Annandale United States of America