Automatic Smart Charger

Product description

Take me directly to Range of services

4 in 1 Charger:There is a switcher in panel. You can switch 100V ( 90-130 Vac ) or 220V (200-240 Vac), an isolation transformer the primary and secondary of the transformer is isolated. 12V when one Led lighting up, 24V when two Led lighting up, 36V when three Led lighting up, 48V when four Led lighting up, When it is charging, it doesn't effect your configure if you touch voltage selecting key. Please be relieved. When flat green lights is lighting up, it means battery is full of charge. You can end charging or keep it going on floating status. Please do plug out AC cord then plug out DC output cord if you need to end charging.

When think about usual smart charger people might heard it to have three steps: Bulk, Absorption, and Float. Wench’s smart charger has 7 intelligent steps! Micro-control to perfectly calculate a battery’s conditions while changing: Smart boost, Desulphation, Bulk, Absorption, After Charge, Battery Testing, and Maintenance. Ours certainly present a better performance for AGM / Gel / Lead-Acid batteries. Currently, 220Vac (input) is available. 2 in 1 mode with 12V or 24V auto detective function.

Contact details

Wenchi & Brothers Co., Ltd.

No. 88, Yongkehuan Rd., Yongkang District
710 Tainan
Taiwan

Contact

Please log in to view users’s details

Range of services

Take me directly to Our products

4 in 1 Charger: (30A12V, 30A24V, 25A36V, 15A48V)

  • Isolation system
  • Soft-start to reduce in-rush current
  • Output short circuit protection
  • Maximum current restriction
  • Minimum output ripple current
  • Minimum standby current
  • Over-voltage protection
  • Thermal fan auto speed control

Smart Charger Model: 4A12V, 8A12V, 30A12V, 15A24V

  • Anti Peak
    - Total protection of batteries and vehicle electronics even in the event of reversal of polarity.
    - Battery recharge without disconnecting from the vehicle.
  • Tester Inside
    - Fast battery test before charging.
    - Test at end of charging.
  • Regeneration
    - Prevents the start of sulphate: by sending a regeneration cycle to the battery before the start of charging
  • Automatic Adaptive Charger
    - No adjustment required: the charger adapts to the battery ensuring speed and quality.
    - Charges to 100% of capacity and recharges heavily discharged batteries.
  • Small Dimension
    - Reduce the volume with the same function

Additional products

Product

DC to AC Pure (True) Sine Wave Inverter

The Pure (True) Sine Wave Inverter is one kind of device that converts DC (Direct Current) power to...

Wenchi & Brothers Co., Ltd. No. 88, Yongkehuan Rd., Yongkang District 710 Tainan Taiwan

Product

DC to AC Modified Sine Wave Inverter

Modified Sine Wave inverters is the other kind of device that converts DC (Direct Current) power to...

Wenchi & Brothers Co., Ltd. No. 88, Yongkehuan Rd., Yongkang District 710 Tainan Taiwan

Product

DC to DC Converter

DC to DC setp-down converter, transfer voltage from 24Vdc to 12Vdc with 5A, 10A, 15A or 20A current....

Wenchi & Brothers Co., Ltd. No. 88, Yongkehuan Rd., Yongkang District 710 Tainan Taiwan

Product

Automatic Battery Charger

From 3A~20A, a variety of chargers available can meet your needs; 4-in-1 Battery Charger is...

Wenchi & Brothers Co., Ltd. No. 88, Yongkehuan Rd., Yongkang District 710 Tainan Taiwan