Startpage
Please use your MyAccount password of Messe Frankfurt
Sharpvision Co., Ltd.
7'' monitor with built-in quad
Product
Product description
1. Single, dual , tribal , quad image and PIP functions available.
On one screen, dual or more pictures show simultaneously. With this function, the blind point problem is solved. For example, when the vehicle is turning right/ left, the driver can see the pictures from both the right side and left side.
2. Support four cameras inputs, the power output from the monitor is 4X300mA
Cameras could be connected directly to this monitor, no need of extra power source. This simplifies the installation.
3. The mirror function for each camera could be set separately.
There’re four modes in the OSD menu: horizontal normal image, horizontal mirror image, vertical normal image and vertical mirror image. Four cameras are set separately, won’t affect each other.
4. Auto scanning and timing image switch
When applied for surveillance, it can be set to auto scanning and image switching time from 1~30 seconds.
5. The display effect and volume can be set separately for each camera
When the cameras are different or the environment is different, the display effect and volume for each camera can be set separately so as to ensure each camera is in the perfect working condition.
6. Working voltage: 12~32V，power short circuit protection
7. Camera’s name can be set up: 8 characters the longest：
By changing the name of cameras, it’s obviously to understand the cameras surveillance position.
8. Four trigger wires for cameras. Once the trigger wire is activated, image switches to the relative camera automatically.
Applied for vehicle rear view systems, the automatic trigger control contributes greatly on auto switch on when right/left turning and backing up; while for surveillance system, alarm systems can be activated.
9. With trigger wire for dual picture, the relative cameras can be combined optionally
For example, if the trigger wire is connected to the cameras installed at the front door and back door in a bus, images of the two cameras will show simultaneously every time when the door is open.
10. The priority of quad picture and dual picture could be set up.
11. Backup distance grid & left/right turning indicator arrow are available
For example, when the vehicle is backing up or turning left/right, the distance grid or the indicator arrow shows on the screen. It’s greatly helpful to tell you the situation of current surveillance.
12. The boot-strap display can be set as your perfect display mode. No need to adjust it every time.
13. The monitor auto switches to the working channel when there is video signal input no matter it’s on or standby.
14. Applicable for both the indoor/outdoor security system and vehicle rear view system.
15. One DVD AV input and two video outputs：
Besides four cameras inputs, there’s another AV input for DVD application or GPS devices. Live video output is available from one video output to another monitor. The other video output is for the recorder, which enable the image to be watched and recorded at the same time.
On one screen, dual or more pictures show simultaneously. With this function, the blind point problem is solved. For example, when the vehicle is turning right/ left, the driver can see the pictures from both the right side and left side.
2. Support four cameras inputs, the power output from the monitor is 4X300mA
Cameras could be connected directly to this monitor, no need of extra power source. This simplifies the installation.
3. The mirror function for each camera could be set separately.
There’re four modes in the OSD menu: horizontal normal image, horizontal mirror image, vertical normal image and vertical mirror image. Four cameras are set separately, won’t affect each other.
4. Auto scanning and timing image switch
When applied for surveillance, it can be set to auto scanning and image switching time from 1~30 seconds.
5. The display effect and volume can be set separately for each camera
When the cameras are different or the environment is different, the display effect and volume for each camera can be set separately so as to ensure each camera is in the perfect working condition.
6. Working voltage: 12~32V，power short circuit protection
7. Camera’s name can be set up: 8 characters the longest：
By changing the name of cameras, it’s obviously to understand the cameras surveillance position.
8. Four trigger wires for cameras. Once the trigger wire is activated, image switches to the relative camera automatically.
Applied for vehicle rear view systems, the automatic trigger control contributes greatly on auto switch on when right/left turning and backing up; while for surveillance system, alarm systems can be activated.
9. With trigger wire for dual picture, the relative cameras can be combined optionally
For example, if the trigger wire is connected to the cameras installed at the front door and back door in a bus, images of the two cameras will show simultaneously every time when the door is open.
10. The priority of quad picture and dual picture could be set up.
11. Backup distance grid & left/right turning indicator arrow are available
For example, when the vehicle is backing up or turning left/right, the distance grid or the indicator arrow shows on the screen. It’s greatly helpful to tell you the situation of current surveillance.
12. The boot-strap display can be set as your perfect display mode. No need to adjust it every time.
13. The monitor auto switches to the working channel when there is video signal input no matter it’s on or standby.
14. Applicable for both the indoor/outdoor security system and vehicle rear view system.
15. One DVD AV input and two video outputs：
Besides four cameras inputs, there’s another AV input for DVD application or GPS devices. Live video output is available from one video output to another monitor. The other video output is for the recorder, which enable the image to be watched and recorded at the same time.
Product specifications
7'' TFT LCD with multi-image view modes:single view,split view,quad view,switching-view
